中文(简体)The serpentine spiral tube heat exchanger is a type of jacketed heat exchanger. It is a concentric sleeve connected by two standard pipes of different sizes. The outer part is called the shell side, and the inner part is called the tube side. Two different media can flow in opposite directions (or in the same direction) on the shell and tube sides to achieve heat exchange.
The function of the serpentine spiral tube heat exchanger:
The serpentine spiral tube heat exchanger uses seamless steel pipes as the outer tube for transporting fluids, which are bent together with the copper tube bundle passing through it to form a laminated snail shell body, and reinforced with steel fixing brackets welded to the shell. The refrigerant and cooling water connecting pipes are respectively led out from both ends of the shell;
The serpentine spiral tube heat exchanger bundle adopts high-quality low rib internal spiral copper tubes. Compared with smooth tubes, it not only increases the heat transfer area, but also the parallel spiral distribution structure of micro internal ribs inside the tube is conducive to the turbulent motion of refrigerant in liquid state, thereby achieving efficient heat transfer;
The outer tube of the serpentine spiral tube heat exchanger uses seamless steel pipes to transport fluids. Due to the thinner pores on the inner wall of the pipeline, the flow rate of the cooling water is smoother. After galvanizing, the inner wall of the pipeline has improved the corrosion resistance and anti fouling ability of the cooling water; The physical properties of fluid steel pipes are the safety guarantee for products to easily resist frequency dense high-pressure impacts and explosion-proof seismic resistance.
